ODROID-N2L with 4GByte RAM


In stock

SKU: 1423472
  1. Processor Amlogic S922X Processor (12nm)
  2. Quad-core Cortex-A73(2.2Ghz) and Dual-core Cortex-A53(2Ghz)
  3. ARMv8-A architecture with Neon and Crypto extensions
  4. Mali-G52 GPU with 6 x Execution Engines (800Mhz)
  5. Memory LPDDR4 4GiB or 2GiB with 32-bit bus width
  6. Data rate: 3216 MT/s


(Including GST)

In stock

Purchase this product now and earn 93 Robu Points!

Low Stock. Order Now !

Free Delivery above ₹499
Free Delivery
above ₹499
1 Year Warranty
6 Months Warranty
Cash On delivery
Cash on Delivery*

Didn’t find what you are looking for?

Category: ODROID SBC

The low-cost variant of our most popular and powerful ARM SBC ODROID-N2+.

This project was actually initiated at the request of several B2B customers. They were satisfied with the performance and convenience of the highly versatile N2+. However, they wanted to embed a relatively compact, cost-effective, simple, and still high-performance SBC into their system.


  1. Smaller and neater form factor: 69 x 56mm
  2. Small size allows for mounting inside a variety of small devices
  3. Suitable for various standalone embedded systems which don’t require Ethernet connectivity
  4. Suitable for building robots, drones, arcade consoles, human-machine-interface devices, and many other applications
  5. Faster and lower power consumption LPDDR4 RAM
  6. Lightweight
  7. Low cost

Package Includes:

1 x ODROID-N2L with 4GByte RAM

SKU: 1423472 Category:

Amlogic S922X Processor (12nm)
Quad-core Cortex-A73(2.2Ghz) and Dual-core Cortex-A53(2Ghz)
ARMv8-A architecture with Neon and Crypto extensions
Mali-G52 GPU with 6 x Execution Engines (800Mhz)


1 x DC jack : outer (negative) diameter 5.5mm, inner(positive) diameter 2.1mm
7.5V ~ 16V (Recommend range of input)
– DC 12V/2A power adapter is recommendedPower consumption:
– IDLE : ≃ 1.5W (Performance governor), 1.3W(Conservative governor)
– CPU Stress (Passive Heat-Sink) : ≃ 5.4W (@1908/2208MHz, Stock), 5.8W (@2016/2400MHz, Overclock)
– CPU Stress (Active Cooling-FAN) : ≃ 6.1W (@1908/2208MHz, Stock), 6.4W (@2016/2400MHz, Overclock)
– Power-Off : ≃ 0.2W


LPDDR4 4GiB or 2GiB with 32-bit bus width
Data rate: 3216 MT/s
1.1Volt low power design


1 x eMMC connector (8G, 16G, 32G, 64G and 128G are available)
1 x microSD slot (DS/HS modes up to UHS-I SDR104)


Optional WiFi or Ethernet USB adapters


1 x HDMI 2.0 (up to 4K@60Hz with HDR, CEC, EDID)
– Although the +5V Power pin is able to supply a minimum of 300mA, according to HDMI 2.0 specification, a sink shall not draw more than 50mA of current from the +5V Power pin.


1 x HDMI digital output

External I/O

1 x USB 3.0 Host port
1 x USB 2.0 Host port
1 x Debug serial console (UART)
1 x MIPI DSI 4Lane (TBD)
1 x Peripheral Expansion Header (40-pin, 2.54mm pitch)
– 2 x DC 5V, 2 x DC 3.3V, 1 x DC 1.8V, 8 x GND
– 1 x SPI
– 1 x UART
– 2 x I2C
– 25 x GPIO (Max)
– 2 x ADC input (10bit, 1.8V Max)
– All of I/O signal level is 3.3 Volt except for ADC input at max 1.8 Volt

Other features

Built with a large passive heatsink
System LEDS Indicators:
– Red (PWR) – Solid light when DC power is connected
– Blue (ALIVE) – Flashing like heartbeat while Kernel is running.
Active Cooling Fan Connector (5V 2-pin)
– Connector (2-pin, 1.25mm pitch)


Dimensions including Fan heatsink: 69mm x 56mm x 22mm
Dimensions including Tall heatsink: 69mm x 56mm x 32mm

Weight (gm)

66g including a Tall heatsink

Shipping Weight 0.1 kg
Shipping Dimensions 10 × 8 × 7 cm
6 Months Warranty

This item is covered with a supplier warranty of 6 months from the time of delivery against manufacturing defects only. This is a quality product from the original manufacturer. Only manufacturing defects are covered under this warranty. Reimbursement or replacement will be done against manufacturing defects.

What voids the warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 0 reviews

0.0 overall

Be the first to review “ODROID-N2L with 4GByte RAM”

There are no reviews yet.

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions
Country Of Origin: South Korea