ODROID-H3 Single Board Computer

(1 customer review)
Availability:

In stock


SKU: 1423468
  1. Intel Jasper Lake N5105 processor
  2. Up to 64GB Dual-channel Memory DDR4 PC4-23400 (2933MT/s)
  3. Two SO-DIMM slots, up to 32GB per slot
  4. PCIe 3.0 x 4 lanes for one M.2 NVMe storage
  5. 2 x 2.5Gbit Ethernet ports
  6. 2 x SATA 3.0 ports

 17,499.00

(Including GST)

In stock

Purchase this product now and earn 175 Robu Points!

Very Low Stock. Order Now !


Free Delivery above ₹499
Free Delivery
above ₹499
1 Year Warranty
6 Months Warranty
Cash On delivery
Cash on Delivery*

Didn’t find what you are looking for?

Brand: HARDKERNEL
Category: ODROID SBC

This is a ODROID-H3 Single Board Computer.

The ODROID-H3 is powered by a 2.9 GHz Intel Celeron N5105 quad-core processor with 24EU Intel UHD graphics @ up to 800 MHz while the ODROID H3+ is based on a 3.3 GHz Pentium N6005 quad-core processor with 32EU Intel UHD graphics @ 900 MHz. All other features seem to be the same for the two; they both support up to 64GB RAM, have the same M.2 PCIe Gen 3 socket, and the same 2x 2.5 GbE, 2x SATA ports, 2x USB 3.0 and 2x USB 2.0.

  • A. CPU (Intel Pentium Silver N6005)
  • B. 2 x DDR4 SO-DIMM slots (Dual channel memory support)
  • C. 1 x M.2 PCI Express Module Socket (NGFF-2280)
  • D. 1 x eMMC (Embedded Multimedia-Card) Socket
  • E. 2 x SATA Power Connectors (2.5mm pitch, JST-XH compatible connector)
  • F. 2 x SATA3 6.0 Gb/s Data Connectors
  • G. 1 x DC Power Jack
  • H. 2 x USB 3.0
  • I. 2 x USB 2.0
  • J. 1 x HDMI 2.0
  • K. 1 x DisplayPort 1.2
  • L. 2 x RJ45 Ethernet Ports (10/100/1000/2500)
  • M. 5 x System LED Indicators
  • N. 1 x Peripheral Expansion Header (24-pin)
  • O. 1 x Power Switch
  • P. 1 x Reset Switch
  • Q. 1 x Backup Battery Connector (2-pin)
  • R. 1 x Active Cooling Fan Connector (4-pin)
  • S. 1 x Audio out, 1 x Audio in, 1 x SPDIF out

Features:

  1. Intel® Quad-Core Processor Jasper Lake N5105 has a base clock of 2GHz and a boost clock of 3.3GHz with 1.5MB L2 and 4MB L3 cache by a 10 nm process.
  2. Up to 64GB Dual-channel Memory DDR4 PC4-23400 (2933MT/s)
  3. Two SO-DIMM slots, up to 32GB per slot
  4. PCIe 3.0 x 4 lanes for one M.2 NVMe storage
  5. 2 x 2.5Gbit Ethernet ports
  6. 2 x SATA 3.0 ports
  7. SSE4.2 accelerator (SMM, FPU, NX, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, AES)
  8. Intel UHD Graphics 32 EUs Turbo 900MHz
  9. HDMI 2.0 and DP 1.2 multiple video outputs
  10. A configurable Unlimited Performance mode allows the CPU to run in sustained turbo boost mode.
  11. RTC / BIOS backup battery is included

Useful Links:


Package Includes:

1 x ODROID-H3 Single Board Computer

SKU: 1423468 Category:
Power

DC jack : outer (negative) diameter 5.5mm, inner(positive) diameter 2.1mm
DC 14V ~ 20V (up to 60W)
DC 15V/4A power adapter is recommended if you don’t use two 3.5“ HDDs
DC 19V/7A power adapter is recommended if you two 3.5” HDDs together
Power consumption:
IDLE: ≃1..9W
CPU Stress: ≃15W
CPU+GPU Stress: ≃18W
Power-off: ≃0.25W
Suspend: ≃0.6W

Processor

Intel Celeron N5105 Processor (10nm, Quad-Core, TDP 10W)
H3+(N6005) : up to 3.3Ghz
4MB L2 Cache
Intel UHD Graphics (24/32 EU up to 900MHz)

Memory

2 x DDR4 1.2V SO-DIMM slots
Dual Channel, up to 2933 MT/s (DDR4-PC23400)
Max memory capacity 64GB
DDR3/DDR5 is not supported

Storage

1 x eMMC connector (bootable and selectable on BIOS)
Various eMMC modules can be purchased at the Hardkernel store
2 x SATA3 6Gbps
1 x M.2 slot (PCIe 3.0 x 4, supports NGFF-2280 cards)

M.2 SATA SSD is not supported

Networking

2 x GbE LAN ports (RJ45, supports 10/100/1000/2500 Mbps)
Realtek RTL8125B
Supports Wake-On-Lan
LED indicators (Green: Link, Amber: Traffic)

Audio

1 x Audio out (3.5mm jack)
1 x Audio in (3.5mm jack)
1 x SPDIF out (ALC1200, HDA codec)
* HDMI & DP have audio output too.

Video

1 x DisplayPort 1.2 (up to 4K@60Hz)
1 x HDMI 2.0 (up to 4K@60Hz)
Dual simultaneous display support

External I/O

2 x USB 3.0 Host ports
2 x USB 2.0 Host ports
1 x Peripheral Expansion Header (24-pin, 2.54mm pitch)
1 x DC 5V, 1 x DC 3.3V, 5 x GND
1 x UART (TXD/RXD/RTS/CTS)
2 x I2C (SCL/SDA)
1 x External Power Button
HDMI CEC, 5VA+
3 x USB 2.0
All 3.3V I/O signal level

Other features

Passive Heatsink
BIOS Backup Battery
Maintains system time and BIOS settings
Power Button
Reset Button
System LEDs Indicators:

– Red (PWR) – Solid light when DC power is supplied

– Blue (left, SLEEP) – turns off only when the system enters into suspend mode

– Blue (right, PMIC) – turns on only when the major power rails are working

– Amber (SATA) – Flashes when SATA data transfers

– Green (NVMe) – Flashes when NVMe data transfers

Active Cooling Fan Connector (12V 4-pin, PWM input + TACHO output)

– Active Cooling Fan is optional

– Connector (4-pin, 2.54mm pitch)

Form Factor

110 x 110 x 47 mm Approx.

Shipping Weight 0.22 kg
Shipping Dimensions 15 × 10 × 6 cm
6 Months Warranty

This item is covered with a supplier warranty of 6 months from the time of delivery against manufacturing defects only. This is a quality product from the original manufacturer. Only manufacturing defects are covered under this warranty. Reimbursement or replacement will be done against manufacturing defects.


What voids the warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 1 review

5.0 overall
1
0
0
0
0

Add a review

  1. Gurmeet Singh Athwal (verified owner)

    This SBC is great for home media servers and local backup systems for homes and offices.
    You can add two desktop hard disk drives.
    This is better than Raspberry Pi if you need performance. Good Packaging.

    Gurmeet Singh Athwal

User Manual

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions
Country Of Origin: South Korea