TBS 500 Carbon fiber frame KIT – (Copy)

(6 customer reviews)
Availability:

In stock


SKU: 29586
  1. Wheelbase: 500mm
  2. Material: Carbon Fiber + Polyamide-Nylon
  3. Weight: 400 gm
  4. Moter Mounting Hole Dia.: 3 mm
  5. Arm Size: 220 x 40 (LxW) mm

Note: This is not an original TBS product, but a high-quality clone of one.

 2,299.00

(Including GST)

In stock

Select below products to add together

M3 Shockproof Sponge Pad-4pcs. ₹ 92

New Price: ₹ 2299


Purchase this product now and earn 23 Robu Points!

Free Delivery above ₹499
Free Delivery
above ₹499
1 Year Warranty
15 Days Warranty
Cash On delivery
Cash on Delivery*

Didn’t find what you are looking for?

Brand: Generic
Category: Drone Frame and Accessories
Tags: Quadcopters, Multirotor Frame, 4 Axis Frame, Carbon Fiber Quadcopter Frame, Martian Quadcopter Frames, TBS 500

This is a TBS 500 Carbon fiber frame KIT – (Copy).

This quadcopter frame with a wheelbase of 500mm is specially intended to provide lots of mounting space. It is well known for aerial video shooting and photography as it has a special Gimbal housing provision at the front. The TBS quadcopter frames outperform similar quads in terms of FPV range and video link quality.

It features a battery plate in the tail position. These large-sized quadcopter frames equip larger motors and batteries, increasing the power capabilities of your multirotor. This advantage results in longer flight time, hence they are perfect for your aerial videography.

It comes with a PDB(Power Distribution Board) to power up the Quadcopter. And is also designed to fit standard flight controllers/PDB, FPV cameras, and also FPV transmitters and antennas.

The frame has a wheelbase of 500mm and weighs around 400gm. It features a mounting tab at the rear end on the bottom plate of the mainframe for mounting Batteries.

The added lift capacity makes this frame ideal for carrying larger payloads such as camera systems and Gimbal.

The frame comes with pre-threaded brass sleeves for all of the frame bolts, so attaching the arms to the mainframe is done within a few minutes.  Also, it requires one size of bolt for the overall build and thus a unique one-size hex wrench which makes hardware mounting very convenient. This feature of TBS Quadcopter Frames makes them so easy to assemble and disassemble.

We are offering a full line of multi-rotor accessories,
Multirotor Motors
ESC’s (Electronic Speed Controller)
Orange Li-PO Batteries
Flight Controllers
FPV Cameras
Gimbals
Propellers
Remotes

You can also check our following Multirotor Kits category if you are a beginner or just not willing to send lot much of time in selecting appropriate parts for your quadcopter and want your quad in the air as soon as possible,
Multirotor Kits

Note: This is not an original TBS product, but a high-quality clone of one.


Features :

  1. Made by advanced engineering material, super strong & smooth
  2. The arm equips support ridges for better and faster forward flight.
  3. Features pre-threaded brass sleeves.
  4. The large mounting tab for camera mounting.

Package Includes : 

2 x TBS 500 Mainframe plates
1 x Power distribution board
6 x Spacers with anodized screws
Set of Screws

Recommendation (NOT Included ) :

  1. Propeller: “1045″ OR “8045” Orange Propeller (CW & CCW)
  2. Battery: 3S Orange LiPo (1800 – 3600mAh)
  3. ESC: 15A – 40A.
  4. Motor: 800-1100 KV (brushless dc motor)
Wheelbase (mm)

500

Weight (g):

400

Arm Size (L x W) mm

220 x 40

Motor Mounting Hole Dia. (mm)

3

Shipping Weight 0.43 kg
Shipping Dimensions 22 × 9 × 4 cm
15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 6 reviews

4.2 overall
2
3
1
0
0

Add a review

  1. suniltg (verified owner)

    This is what I like about Robu. High-quality parts. Though a replica, this frame’s cutting was perfect, screw holes were precisely drilled and there was no trouble assembling it. Great product.

    suniltg

  2. umeshrj29 (verified owner)

    Nice frame….
    Bolts Size: M2.5 for arms and M3 for standoffs
    Slightly misaligned but little bit of adjustment and fits perfectly. Keep the screws loose, align all the screws and then fix it properly or else it will never match.
    Try to assemble upper plate to the arms first and then bottom plate….just a suggestion.
    Major disadvantage is the mounting of FC is on the top plate, not secured against the crash. So be aware of that.

    umeshrj29

  3. Abhishek Reddy (verified owner)

    Though the frame is of good quality, this is not the original Team Black Sheep (TBS) frame… The mounting screws for the arms on the bottom plate were just not aligning well at all… This same happened with my previous F330 clone purchased from this site itself… That is very annoying… Rest all is fine as expected.

    Abhishek Reddy

  4. Joe (verified owner)

    I got by package within 24 hrs due to same day shipping. It’s an awesome from but it’s a clone not original TBS discovery. But in my case some screws were missing thus giving 3 stars.

    Joe

  5. SUJEET KUMAR YADAV

    I am using the glass fibre version from 1 year & I would say it’s design is very good.

    SUJEET KUMAR YADAV

  6. Chakresh Das (verified owner)

    Firstly the delivery service was really fast , i got it by the 3rd day .Now talking about the frame, i would definately say, that the quality and standard of the parts are really good, though its not the original TBS frame which had circuits and channels embeded into the main frame for ease of connection. The drilled holes for mounting the arms were slightly ofset during production, that really created a problem during assembling the upper part of the frame. another thing to be mentioned is the placement of the anti vibration mounting for the flight controller.It would have been betr if it was mounted on the lower part, then it would have been robust, leading to less prone of fc to get damaged. Overall i love the frame and the design , and i am satisfied with it

    Chakresh Das

Questions and answers of the customers

    Where can i get the spare arms of this frame?
  1. 0 votes
    Q Where can i get the spare arms of this frame? answer now
    Asked by toxiccharger30 on March 6, 2024 1:13 pm
    A

    You will find spare arm of this frame on our si... Read more

  2. which size of motor is suitable for this frame ? p... Read more
  3. 0 votes
    Q which size of motor is suitable for this frame ? please specify ...
    Asked by BHAGAT on October 10, 2020 11:42 pm
    There are no answers for this question yet. Answer now
Only registered users are eligible to enter questions
Country Of Origin: China

You may also like…