Original Arduino GIGA R1 WiFi ABX00063


In stock

SKU: 1524518
  1. Connectivity: WiFi
  2. Chip: STM32H747XiH6
  3. Clock: Cortex M7480 MHz and Cortex M4 240 MHz
  4. Memory: 2MB (Flash)
  5. SDRAM: 8MB
  6. Flash QSPI 16MB
  7. Interface: I2C, I2S, SPI, USB-A, UART, SAI
  8. Voltage: 5V

 5,344.00  6,299.00

(Including GST)

  You save(15.2%): ₹ 955.00

In stock

Purchase this product now and earn 54 Robu Points!

Free Delivery above ₹499
Free Delivery
above ₹499
1 Year Warranty
6 Months Warranty
Cash On delivery
Cash on Delivery*

Didn’t find what you are looking for?

Brand: Arduino
Category: Original Arduino Boards, Development Board on Sale

The Original Arduino GIGA R1 WiFi is designed for ambitious makers who want to step up their game. It levels the playing field for gamers, artists, sound designers, and anyone coming to the tech world with big ideas on a budget – because it packs advanced features into an accessible component, with the same form factor as our popular Mega and Due.

Arduino GIGA R1 WiFi board brings the STM32H7 dual-core Cortex-M7/M4 microcontroller found in the Portenta H7 boards to the larger Arduino Mega/Due form factor with up to 76 GPIO pins.

Original Arduino GIGA R1 WiFi

As its name implies, the board also comes with a WiFi 4 (and Bluetooth 5.1) module, as well as an audio jack, a USB Type-C port for programming, a USB 2.0 Type-A host port, and extra connectors for a display and a camera.


  1. Microcontroller (STM32H747XI): This dual-core 32-bit microcontroller allows you to have two brains talking to each other (a Cortex®-M7 at 480 MHz and a Cortex®-M4 at 240 MHz) you can even run micropython in one and Arduino in the other.
  2. Wireless communication (Murata 1DX):  Whether you prefer Wi-Fi® or Bluetooth®, the GIGA R1 WiFi got you covered. You can even quickly connect to the Arduino IoT Cloud and keep track of your project remotely. And if you are concerned about the security of the communication, the ATECC608A keeps everything under control.
  3. Hardware ports and communication: Following the legacy of the Arduino Mega and the Arduino Due, the GIGA R1 WiFi has 4 UARTs (hardware serial ports), 3 I2C ports (1 more than its predecessors), 2 SPI ports (1 more than its predecessors), 1 FDCAN.
  4. GPIOs and extra pins: We wanted to keep the same form factor of the Mega and the Due, so you can easily adapt your custom-made shields to the GIGA R1 WiFi (remember this board works at 3.3V though!) and we added extra headers to access extra pins, leaving the total count to 76 GPIO pins, and the best part, you can access them from underneath, so keep your project as it is and just think on how to expand it. Also, we added two new pins: a VRTC so you can connect a battery to keep the RTC running while the board is off and an OFF pin so you can shut down the board.
  5. Connectors:
    1. The GIGA R1 WiFi has extra connectors on board which will facilitate the creation of your project without any extra hardware. This board has:
    2. USB-A connector is suitable for hosting USB sticks, other mass storage devices, and HID devices such as a keyboard or mouse.
    3. 3.5mm input-output jack connected to DAC0, DAC1, and A7.
    4. USB-C® to power and program the board, as well as simulate an HID device such as a mouse or keyboard.
    5. Jtag connector, 2×5 1.27mm.
    6. 20-pin Arducam camera connector.
  6. Higher voltage support: In comparison with its predecessors that support up to 12 volts, the GIGA R1 WiFi can handle a range of 6 to 24 volts.

Package Includes:

1 x Original Arduino GIGA R1 WiFi ABX00063


STM32H747XI dual Cortex-M7+M4 32bit low power Arm MCU (datasheet)

Radio Module

Murata 1DX dual WiFi 802.11b/g/n 65 Mbps and Bluetooth® (datasheet)

Secure Element



USB-C Programming Port / HID
USB-A Host (enable with PA_15)


Digital I/O Pins: 76
Analog input pins: 12
DAC: 2 (DAC0/DAC1)
PWM pins: 12
Misc: VRT & OFF pin


UART: Yes, 4x
I2C: Yes, 3x
SPI: Yes, 2x
CAN: Yes (Requires an external transceiver)


Camera: I2C + D54-D67
Display: D1N, D0N, D1P, D0P, CKN, CKP + D68-D75
Audio Jack: DAC0, DAC1, A7


Circuit operating voltage: 3.3V
Input voltage (VIN): 6-24V
DC Current per I/O Pin: 8 mA

Clock Speed

Cortex M7: 480 MHz
Cortex M4: 240 MHz


STM32H747XI 2MB Flash, 1MB RAM


Width: 53 mm
Length: 101 mm

Shipping Weight 0.1 kg
Shipping Dimensions 10 × 8 × 5 cm
6 Months Warranty

This item is covered with a supplier warranty of 6 months from the time of delivery against manufacturing defects only. This is a quality product from the original manufacturer. Only manufacturing defects are covered under this warranty. Reimbursement or replacement will be done against manufacturing defects.

What voids the warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 0 reviews

0.0 overall

Be the first to review “Original Arduino GIGA R1 WiFi ABX00063”

There are no reviews yet.


Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions
Country Of Origin: China