Adafruit Feather 328P -Atmega328P 3.3V @ 8MHz


In stock

SKU: 1012196
  1. ATmega328p @ 8MHz with 3.3V logic/power
  2. 3.3V regulator with 500mA peak current output
  3. USB serial converter (CP2104)
  4. USB bootloader and serial port debugging
  5. Hardware I2C, hardware SPI support


(Including GST)

In stock

Purchase this product now and earn 13 Robu Points!

Free Delivery above ₹499
Free Delivery
above ₹499
1 Year Warranty
15 Days Warranty
Cash On delivery
Cash on Delivery*

Didn’t find what you are looking for?

Brand: Adafruit
Category: AVR Microcontroller Board
Tags: ATmega328P, Feather 328P

With this Feather we’re getting a little nostalgic for the ATmega328P – the classic ‘Arduino’ chip – with this Adafruit Feather 328P running a 3.3V and 8 MHz. Feather is the new development board from Adafruit, and like its namesake, it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores.

At the Feather 328P’s heart is an ATmega328P clocked at 8 MHz and at 3.3V logic, a chip setup we’ve had tons of experience with as it’s the same as the Pro Mini and similar to the Adafruit Metro 328. This chip has 32K of flash and 2K of RAM, and we paired it with a SiLabs CP2104 to give it a USB-to-Serial program & debug capability built-in. Works great when you want to keep your classic Arduino code compatibility.

To make it easy to use for portable projects, we added a connector for any of our 3.7V Lithium polymer batteries and built-in battery charging. You don’t need a battery, it will run just fine straight from the micro USB connector. But, if you do have a battery, you can take it on the go, then plug in the USB to recharge. The Feather will automatically switch over to USB power when it’s available. We also tied the battery through a divider to an analog pin, so you can measure and monitor the battery voltage to detect when you need a recharge.

The Feather 328P has some extra space left over, so we give you a tiny little prototyping area. If you just need to attach a button or sensor, you may be able to skip out on a breadboard and wire it directly on there.


  1. Light as a feather – 4.8 grams
  2. ATmega328p @ 8MHz with 3.3V logic/power
  3. 3.3V regulator with 500mA peak current output
  4. USB serial converter (CP2104) for USB bootloader and serial port debugging
  5. You also get tons of pins – 19 GPIO pins + 2 analog-in-only pins
  6. Hardware I2C, hardware SPI support. For UART devices, should use SoftwareSerial
  7. 6 x PWM pins
  8. 8 x analog inputs (two are shared with I2C)
  9. Built-in 100mA LiPo charger with charging status indicator LED
  10. Pin #13 red LED for general purpose blinking
  11. Two LEDs for serial data RX & TX
  12. Power/enable pin
  13. 4 mounting holes
  14. Reset button

Package Includes:

1 x Adafruit Feather 328P – Atmega328P 3.3V @ 8 MHz

SKU: 1012196 Category: Tags: ,

ATmega328p @ 8MHz



Peak Current (A)


USB Serial Connector


Length (mm):


Width (mm):


Height (mm):


Weight (g):


Shipping Weight 0.02 kg
Shipping Dimensions 5 × 3 × 1 cm
15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.

What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 0 reviews

0.0 overall

Be the first to review “Adafruit Feather 328P -Atmega328P 3.3V @ 8MHz”

There are no reviews yet.


Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions
Country Of Origin: United States