Pololu High-Power Stepper Motor Driver 36v4

Availability:

In stock


SKU: 1607680
  1. Inputs compatible with 1.8 V, 3.3 V, and 5 V logic
  2. Under-voltage lockout, over-current protection, short circuit protection, and reverse-voltage protection (up to 40 V)
  3. High-power: can deliver up to 4 A continuous per phase without extra cooling (6 A max with sufficient additional cooling)
  4. Highly configurable through SPI interface
  5. Optional STEP/DIR control pins (stepping can also be controlled through SPI interface alone)

 

 3,818.00

(Including GST)

In stock

Purchase this product now and earn 39 Robu Points!

Low Stock. Order Now !


Free Delivery above ₹499
Free Delivery
above ₹499
1 Year Warranty
15 Days Warranty
Cash On delivery
Cash on Delivery*

Didn’t find what you are looking for?

Brand: Pololu
Category: Pololu Motor Drivers

This discrete MOSFET stepper motor driver enables control of one bipolar stepper motor. It supports a wide 8 V to 50 V operating voltage range and can deliver up to 4 A continuous per phase without a heat sink or forced air flow (6 A max with sufficient additional cooling). The SPI interface allows configuration of the current limiting, step mode (9 step modes from full-step through 1/256-step), decay mode, and stall detection. The driver also provides back-EMF feedback that can be used for more advanced control and stall detection algorithms. Additional features include reverse-voltage, under-voltage, and over-current protection. The Pololu High-Power Stepper Motor Driver 36v4 combines the DRV8711 stepper motor driver IC from Texas Instruments with external MOSFETs to enable control of large bipolar stepper motors at operating voltages from 8 V to 50 V.

Note: For more technical data kindly refer attached datasheet

Features:

  1. Wide 8 V to 50 V operating voltage range
  2. Nine different step resolutions down to 256 micro steps: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, 1/32-step, 1/64-step, 1/128-step, and 1/256-step
  3. Adjustable current control lets you set the maximum current output, enabling the use of voltages above your stepper motor’s rated voltage to achieve higher step rates
  4. Adaptive blanking time, adjustable decay times, and various current decay modes enable the creation of ultra-smooth motion profiles through the SPI interface
  5. Optional STALL output enables stall detection when micro stepping
  6. Optional BEMF output enables more advanced control and stall detection algorithms based on the back EMF of the stepper motor
  7. Driver supports alternate operating mode for controlling two brushed DC motors with PWM inputs instead of one bipolar stepper motor with STEP/DIR inputs


Package Includes:

1 x Pololu High-Power Stepper Motor Driver 36v4

SKU: 1607680 Category:
Minimum operating voltage

8 V

Maximum operating voltage

50 V

Continuous current per phase

4 A

Maximum current per phase

6 A

Minimum logic voltage

1.5 V

Maximum logic voltage

5.5 V

Microstep resolutions

full, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256

Current limit control

SPI-programmable

Reverse voltage protection

Y

Header pins soldered

N

Shipping Weight 0.015 kg
Shipping Dimensions 11 × 9 × 2 cm
15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Pololu High-Power Stepper Motor Driver 36v4”

There are no reviews yet.

Datasheet

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions
Country Of Origin: United States (US)