ESP32-WROVER-IE ESP32-DEVKITC Core Board for Arduino

Availability:

Out of stock

Approx Restocking Date: 25 to 30 Days
SKU: 1535275

 

  1. Type of development kit: WiFi
  2. Ciphering: AES, WPA2-PSK, WPA, WPS
  3. Programmers and development kits features: I/O lines on the pin header
  4. Communication protocol: Bluetooth, Bluetooth Low Energy, IEEE 802.11b/g/n/e/i
  5. Flash memory capacity: 8MB:
  6. SRAM memory capacity: 8388608B

 1,941.00

(Including GST)

Out of stock


Free Delivery above ₹499
Free Delivery
above ₹499
1 Year Warranty
15 Days Warranty
Cash On delivery
Cash on Delivery*

Didn’t find what you are looking for?

You must register to use the waitlist feature. Please login or create an account
Brand: Espressif
Category: IoT Development Boards
Tags: ESP32, ESP32 Series, development kit

Espressif Systems ESP32-DevKitC V4 Development Board is a small-sized ESP32-based development board produced by Espressif. Most of the I/O pins are broken out to the pin headers on both sides for easy interfacing. Developers can either connect peripherals with jumper wires or mount the Espressif Systems ESP32-DevKitC V4 on a breadboard.

ESP32-WROVER-IE is too powerful, generic WiFi-BT-BLE MCU module that targets a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming, and MP3 decoding.


Features:

  1. ESP32-WROVER: ESP32-WROVER is a powerful, generic Wi-Fi MCU module that integrates ESP32-S2. It has a PCB antenna, a 4 MB external SPI flash, and an additional 2 MB PSRAM.
  2. Pin Headers: All available GPIO pins (except for the SPI bus for flash and PSRAM) are broken out to the pin headers on the board. Users can program the ESP32 chip to enable multiple functions such as SPI, I2S, UART, I2C, touch sensors, PWM, etc.
  3. 3.3 V Power On LED:  Turns on when the USB power is connected to the board.
  4. USB-to-UART Bridge: Single USB-UART bridge chip provides transfer rates of up to 3 Mbps.
  5. Reset Button: Reset button.
  6. Micro-USB Port: USB interface. Power supply for the board as well as the communication interface between a computer and the ESP32 chip.
  7. Boot Button Download button. Holding down the Boot and then pressing Reset initiates Firmware Download mode for downloading firmware through the serial port.
  8. RGB LED: Addressable RGB LED (WS2812).

Specifications:

  1. Manufacturer: ESPRESSIF
  2. Type of development kit: WiFi
  3. Operating temperature: -40…85°C
  4. Ciphering: AES, WPA2-PSK, WPA, WPS
  5. Programmers and development kits features: I/O lines on the pin header
  6. Components: ESP32-WROVER-IE
  7. Communication protocol: Bluetooth, Bluetooth Low Energy, IEEE 802.11b/g/n/e/i
  8. Flash memory capacity: 8MB:
  9. SRAM memory capacity: 8388608B
  10. Kind of connector: I-PEX (u.FL)
    pin strips
    USB micro
  11. Interface: GPIO
    I2C
    I2S
    SPI
    UART
    WiFi
  12. Gross weight: 11.69 g
SKU: 1535275 Category: Tags: , ,
Shipping Weight 0.011 kg
Shipping Dimensions 10 × 3 × 2 cm
15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “ESP32-WROVER-IE ESP32-DEVKITC Core Board for Arduino”

There are no reviews yet.

DATASHEET

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions
Country Of Origin: China