BIGTREETECH BTT SKR V1.4 Turbo Control Board for 3D Printer

Availability:

In stock


SKU: 1604109
  1. Reserved closed-loop drive interface, eliminating the trouble of plug-in transfer module;
  2.  Dual Z-axis interface, eliminating the trouble of external drive expansion module;
  3. The thermistor interface is protected by a bile capacitor pressure sensitive resistor to enhance the resistance of the interface;
  4. More fan interfaces: 1 digitally controlled fan, 3 normally open fans;
  5.  External DC5V power module can be plugged in to supply power to TFT screen, BLtouch, Neopixel.

 4,429.00

(Including GST)

In stock

Purchase this product now and earn 45 Robu Points!

Very Low Stock. Order Now !


Free Delivery above ₹499
Free Delivery
above ₹499
1 Year Warranty
15 Days Warranty Against Sealed Product
Cash On delivery
Cash on Delivery*

Didn’t find what you are looking for?

Category: 3D Printer Display and Controller

This is a BIGTREETECH BTT SKR V1.4 Turbo Control Board for 3D Printer . Using the 32 bit main frequency 100 MHz arm level cortex M3-series, LPC1768 main control chip the performance has improved. It is equipped with highly modular and open source firmware marlin 2.0 which is very convenient for users. The controller board is responsible for the electronic functioning of a 3D printer.

Without a controller board, a 3D printer wouldn’t really be able to do anything except turn certain components on and off at the manual flick of a switch. 3D printer controller boards handle all the logic, such as parsing g-code files, regulating temperature, and moving motors. The last action is particularly computationally and electrically substantial since we’re talking about stepper motors. First of all, this BIGTREETECH SKR V1.4 Turbo Control Board is a 32-bit board — compared to something like the RAMPS or RAMBo, which are 8-bit boards. But the power gains don’t stop there because this 3D printer controller board boasts a 120-MHz processor, which is leaps ahead of the older ATMega chips that only clock 8 MHz.


Features:

1) Adopt high-performance MOSFET tube, better heat dissipation effect;
2) The use of pluggable fuses makes the replacement process easier;
3) Reserve BLTouch interface SERVOS and Probe for easy use of BL Touch;
4) RGB light bar supporting Neopixel scheme;
5) Use the power selection design to separate the USB power supply from the switching power supply, effectively avoiding short circuit Causes the computer’s USB port to be burned;
6) The special function interface uses conspicuous pin headers, which greatly reduces the error rate of wiring.
7) Reserved I2C, SPI, WIFI interfaces, convenient for customers to DIY


Package Includes:

1 x BIGTREETECH SKR V1.4 Turbo Control Board

1 x 50 cm USB cable

SKU: 1604109 Category:
Item Type:

Controller Board

Model Series:

BTT SKR Series

Compatibility

TMC Specific Driver Series

Supply Voltage (V)

12 V to 24 V DC

Logic Voltage (V)

3.3 V

Processor

ARM Cortex-M3

Clock Frequency

120 MHz

Supported

(according to motion kinematics), CoreXY, Delta, Kossel, Printer Type XYZ, Ultimaker

Communication Interface

I2C, SPI, WiFi

Communication

microSD card reader, USB type B socket

Dimensions (mm)

110 x 84 x 20

Weight (g):

88

Shipping Weight 0.165 kg
Shipping Dimensions 14 × 12.5 × 3.5 cm
15 Days Warranty Against Sealed Product

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defect.  Reimbursement or replacement will be done against manufacturing defects.


What voids the warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.


Warranty  Against Sealed Product:

This product comes with manufacturer seal so, warranty Policy shall cover only those issues pertaining to the manufacturing defects in the product. In any other case, No return will be accepted if the seal is broken.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “BIGTREETECH BTT SKR V1.4 Turbo Control Board for 3D Printer”

There are no reviews yet.

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions
Country Of Origin: China